• 카테고리 전체보기 +  
  • 비접촉/온도/습도
  • 열화상카메라
  • 차압계,압력계
  • 산업용내시경
  • 가스/먼지검지기
  • 풍속.소음.방사능
  • 유량,변위,거리
  • 블랙바디,CAL

알루미늄 열연 (해외배송 가능상품)

기본 정보
상품명 알루미늄 열연
Application Aluminium Hot Rolling
원산지 이스라엘
판매가 -
배송비 3,000원 (30,000원 이상 구매 시 무료)
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
알루미늄 열연 수량증가 수량감소 - (  )
총 상품금액(수량) : 0 (0개)

상품상세정보

Aluminium Hot Rolling

aluminium indstry process


Non-contact measurement using infra-red sensors has been tried many times but with only limited success on aluminum because of the low and variable emissivity.

AST & 3T companies have successfully developed an infra-red temperature measurement system that uses several different wavelengths and complex algorithms to

accurately measure the temperature in the hot-rolling of aluminum alloys. The AST & 3T pyrometer has the option to store different calibrations in different groups in the

processor memory and it is possible to switch between groups by a signal from an external PLC.


Real-time temperature information during each rolling stage supports process optimization as follows:


Slab temperature:
As the temperature of the slab cannot be directly measured inside the furnace this measurement is the first real temperature measurement.

The slab measurement can be used to adjust the furnace temperature for the next slab but, more importantly, it can be used to set the process parameters in the first rolling operation.


Recommended Products: AC3000


 

  AC3000 Infrared Thermometer



Strip Temperature:

The actual temperature of the strip can be measured at all stages(thickness) and can be used to adjust the rolling speed and cooling intensity according to process requirements.


Recommended Products: AC3000


 

  AC3000 Infrared Thermometer





Coiling Temperature:

Allows the absolute temperature value and the temperature distribution along the strip to be recorded.

This recorded temperature can be used to both modify the previous stage for the next Slab and, most importantly,

to adjust the coiling speed and cooling and thus to obtain the correct conditions for the metallurgical properties.

These metallurgical properties can be achieved either by expensive special aging processes in a furnace or by

adjusting the coiling speed and cooling rate to produce the correct structure followed by natural aging.


Recommended Products: AC3000


 

  AC3000 Infrared Thermometer



Below application images of Installation of AST Pyrometers


aluminium indstry process


Importance of non-contact temperature measurement for Hot Rolling Lines


  • Not possible to touch the metal moving continuously at a high speed during the rolling process with a thermocouple.

  • Even if it is possible to interrupt the rolling process for manual measurement of the slab or thick strip, this cannot be carried out during the final passes and coiling due to the process specification.

  • Even when it is possible to stop the strip, there is a delay in the process and a reduction in the line productivity.
  •      For example, in order to monitor the slab or strip temperature at the start of the process the mill has to be stopped and the thermocouple mechanically positioned.
        At least 10 sec will be needed for the measurement. This results in at least a delay of 20-25 sec.







    상품사용후기

    상품의 사용후기를 적어주세요.

    게시물이 없습니다

    상품문의하기 모두 보기

    상품 Q&A

    상품에 대해 궁금한 점을 해결해 드립니다.

    게시물이 없습니다

    상품문의하기 모두 보기

    상품결제정보

    고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

    무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
    주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

    배송정보

    • 배송 방법 : 택배
    • 배송 지역 : 전국지역
    • 배송 비용 : 3,000원
    • 배송 기간 : 1일 ~ 3일
    • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
      고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

    교환 및 반품정보

    교환 및 반품이 가능한 경우
    - 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
      경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
    - 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
      다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

    교환 및 반품이 불가능한 경우
    - 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
      포장 등을 훼손한 경우는 제외
    - 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
      (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
      따른 반품/교환은 제조사 기준에 따릅니다.)
    - 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
      제공한 경우에 한 합니다.
    - 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
    - 복제가 가능한 상품등의 포장을 훼손한 경우
      (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

    ※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
      (색상 교환, 사이즈 교환 등 포함)

    서비스문의